Serving the Brownsville area  ·  (956) 338-5955  ·  Open Mon-Sun 7am-7pm
📞 (956) 338-5955 Free Quote

Asphalt Paving in Combes, TX (78535) · Local Professionals

Brownsville Asphalt Paving · Fast response in Combes and the Brownsville area · Free estimate 24h

✅ Written Estimates & Tonnage Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+40Verified Reviews
13Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates & Tonnage Specs

Combes sits 24 miles south of Brownsville in the heart of Cameron County's farm belt, where wide lots, flat terrain, and heavy clay soil create some of the toughest driveway conditions in South Texas. Most homes here were built mid-century or earlier, with driveways that have settled, cracked, or rutted over decades of heat, humidity, and Gulf Coast storms.

Brownsville Asphalt Paving has been serving Combes and the surrounding area since 2013. We know this town's soil, its drainage problems, and the specific paving challenges that come with older residential stock and agricultural land. When a Combes homeowner needs their driveway repaired, resurfaced, or replaced, or when a property manager has to upgrade a gravel lane to asphalt, we're the local crew they call.

Asphalt Paving in Combes (78535)

Combes has a particular paving story. The town's flat topography and heavy clay subgrade mean that water doesn't run off a driveway the way it does elsewhere. After a Gulf storm or a hard rain, water sits on the surface instead of draining away, and that standing water works into the clay beneath. The clay swells when wet and shrinks hard when the summer heat returns, and that movement cracks and heaves asphalt that wasn't built on a proper compacted base. Many older driveways in Combes were never built thick enough to bridge that movement, so they fail in patterns that look like alligator cracking or a surface that has settled at one end.

We've been paving driveways, parking lots, and private roads in Combes and Cameron County since 2013. We understand the subgrade here, the drainage challenges, and how to build a driveway that will hold through the heat and the rain. We also know that many Combes properties sit on land where access is tight, where a full-size paver and roller have to navigate ranch gates and narrow farm lanes. We plan for that.

Our services in Combes

How a Job Works in Combes

We start with a free on-site visit to your property in Combes. We look at the existing driveway or lot, measure the square footage, check the subgrade and drainage, and talk through what needs to happen. If you have an HOA or if your property abuts the road, we'll discuss permitting and any coordination that's needed. We provide a written estimate with tonnage specs so you know exactly what you're getting.

On the day of work, our crew brings in equipment sized for Combes properties, including access for tight lots and long ranch driveways. We prepare the subgrade, compact the base, lay the hot mix asphalt to the thickness your driveway needs, and finish the apron where it meets the street. If you need grading or drainage work, we handle that as part of the job. We leave your property clean and your driveway ready to use.

After the job is done, we walk through the finished work with you and answer any questions. New asphalt takes six to twelve months to fully cure, so we'll explain what to expect during that period and why sealing before the cure is complete can trap moisture and cause problems later.

Driveway paving in Combes typically starts at $6 per square foot for a new installation, and resurfacing an existing drive runs from $4 per square foot. Repair work, including pothole patching and localized damage, starts at $450. A complete driveway replacement, where the old surface comes out and a new base goes in, runs from $7 per square foot. For gravel driveways that need conversion to asphalt, we offer recycled asphalt millings starting at $3 per square foot, or a tar and chip surface from $5 per square foot. The real cost depends on the square footage of your driveway, the condition of the subgrade, how much base preparation is needed, and the thickness we have to build to. Call us at (956) 338-5955 for a free estimate. We'll measure your property, assess the soil and drainage, and give you a realistic price in writing.

✅ Written Estimates & Tonnage Specs, fully insured for work in Combes and nearby areas.

Why do so many driveways in Combes crack and settle after a few years?
Combes sits on heavy clay and silty clay loam that shrinks hard in the summer heat and swells again when the rain returns. If a driveway wasn't built on a compacted aggregate base thick enough to bridge that movement, the clay's expansion and contraction will crack the asphalt and cause it to settle unevenly. Many older driveways in Combes were never built to handle this, which is why we always check the subgrade and build a proper base before we lay any asphalt.
My driveway has water pooling on it after heavy rain. Can it be fixed, or does it need to be replaced?
Pooling water usually means the pitch has failed, either because the driveway has settled or because the original grade was never right. If the rest of the surface is in good condition, we can often mill off the top layer and re-lay it with the correct slope so water runs off toward the street or a drainage area. That's resurfacing, and it costs less than replacement. If the surface is also cracked and broken, we'll recommend replacement. Call us at (956) 338-5955 and we'll come out and assess it.
How much does it cost to pave a driveway in Combes?
A new asphalt driveway in Combes typically runs $6 per square foot, but the real cost depends on how many square feet you have, the condition of the base, and how thick we need to build it to handle your subgrade. A typical residential driveway might be 500 to 1,000 square feet. Resurfacing an existing drive costs less, starting at $4 per square foot. Get a free estimate by calling (956) 338-5955 and we'll measure your property and give you a written quote.
Do I need a permit from the City of Combes to pave my driveway?
Permitting for driveways in Combes is set by the city. The driveway apron where your drive meets the street, any curb cut, and any work in the right-of-way may require a permit. We recommend contacting the City of Combes directly to verify what permits apply to your property before you start. If your property is in an HOA, you'll also need to check the architectural standards for your community. We can help you navigate the process, but the city has the final say on what's required.
My property has an HOA. Do I need approval before paving my driveway?
Most HOAs in the greater Brownsville area have architectural standards that govern driveway materials and extensions. Check your HOA rules or contact your HOA board before you start. If you're planning an extension or widening, the HOA may have specific requirements. Once you have HOA approval, we can coordinate with the city on any permits that are needed. Property lines and shared driveways can get complicated, so if you're unsure about the boundary, it's worth a conversation with your HOA and your neighbors.
Are you fully insured?
Yes, we carry full general liability and workers' compensation insurance. You can work with confidence knowing that our crew and your property are covered.
When is the best time to pave a driveway in Combes?
Asphalt paving in Combes works best in the cooler months, roughly October through April, when the heat doesn't rush the cure and we have a wider window for compaction. Summer heat in South Texas is intense, and while we can pave in summer, the work moves faster and the window for getting the asphalt compacted correctly is narrower. After the job is done, new asphalt needs six to twelve months to fully cure before you seal it. Sealing too early can trap moisture in the clay beneath and cause problems, so patience in the first year pays off.
Why choose us?

Trusted professionals since 2013

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Asphalt Paving Services in Brownsville

All your work handled by qualified professionals in Brownsville

Asphalt Driveway Paving & Installation

Built for Brownsville's delta clay and Gulf downpours

Included in your service

  • New hot mix apron tied into the Brownsville street grade
  • Aggregate base built to bridge Cameron County delta clay
  • Surface pitched at a quarter inch per foot for Gulf downpours
  • Edge compaction sized for the resaca-lined flat lots
Learn more→

Driveway Repair

Fixing cracks before Brownsville's clay turns them into potholes

Included in your service

  • Cut and patch full-depth where Cameron County clay has failed
  • Skin patch option for surface-only cracking on older Brownsville drives
  • Tack coat sealing edges against resaca-fed groundwater
  • Grading tweak so runoff clears the flat delta lot
Learn more→

Pothole Repair & Asphalt Patching

Patching the potholes Brownsville's clay and rain leave behind

Included in your service

  • Saw-cut edges for a clean patch on Cameron County streets
  • Full-depth fill where Rio Grande delta clay has pumped out
  • Compaction with a vibratory roller before topping with hot mix
  • Flush finish that sheds ponding after Gulf storm rain
Learn more→

Asphalt Resurfacing & Overlay

A new surface course over Brownsville's tired driveways

Included in your service

  • Milling of the worn surface course across Brownsville streets
  • Fresh binder and surface layer tied flush at driveway edges
  • Pitch reset at a quarter inch per foot for flat delta lots
  • Tack coat bonding new asphalt to the old Cameron County base
Learn more→

Asphalt Milling & Removal

Clearing old asphalt down to Brownsville's clay base

Included in your service

  • Full removal of failing asphalt down to the delta clay subgrade
  • Haul-off of milled material from Cameron County job sites
  • Base inspection for resaca-area moisture before rebuilding
  • Clean tie-in edges ready for Brownsville's next paving phase
Learn more→

Driveway Replacement

Full rebuilds for Brownsville's clay-heavy delta lots

Included in your service

  • Full tear-out down to Cameron County delta clay subgrade
  • Rebuilt aggregate base compacted in lifts for the flat lot
  • New hot mix pitched at a quarter inch per foot for drainage
  • Apron rebuilt to handle Brownsville street traffic and storms
Learn more→

Parking Lot Paving & Construction

Commercial paving built for Cameron County's clay and storms

Included in your service

  • Proof-rolled base built for Cameron County port traffic
  • Full-depth asphalt sized for trucks on Brownsville commercial lots
  • Drainage pitch to move water off the flat delta ground
  • Striping and layout suited to Cameron County code needs
Learn more→

Parking Lot Repair & Resurfacing

Patching Cameron County lots before clay damage spreads

Included in your service

  • Cut-and-patch repair sized for Cameron County traffic loads
  • Base rebuild where delta clay has pumped under the lot
  • Crack sealing before the next Gulf storm season
  • Restriping after patch work on Brownsville commercial sites
Learn more→

Recycled Asphalt & Millings Driveways

A budget surface for Brownsville's rural and delta lots

Included in your service

  • Recycled millings compacted in lifts for Cameron County lots
  • Firm base laid over Brownsville's soft delta clay
  • Graded pitch to shed water off flat resaca-area ground
  • Budget option suited to rural Cameron County driveways
Learn more→

Tar & Chip Driveways

A textured surface built for Brownsville's heat and storms

Included in your service

  • Hot-applied binder and stone chip laid for Cameron County drives
  • Rolled finish built to handle Brownsville's summer heat
  • Texture that sheds standing water on flat delta lots
  • Edge work fit for older neighborhoods along the resacas
Learn more→

Gravel Driveway Installation & Grading

Grading Brownsville's flat lots so gravel actually drains

Included in your service

  • Grading pitched at a quarter inch per foot for flat delta lots
  • Base compacted to handle Cameron County clay movement
  • Drainage swale work for lots near Brownsville's resacas
  • Gravel sized for rural driveways across Cameron County
Learn more→

Private Road & HOA Paving

Private road paving for Cameron County subdivisions

Included in your service

  • Heavy-duty base built for Cameron County subdivision roads
  • Full-width paving sized for HOA traffic near Los Fresnos
  • Drainage pitch to handle Gulf storm runoff on shared roads
  • Edge and shoulder work fit for flat delta subdivisions
Learn more→

Driveway Extensions, Widening & Aprons

Widening drives and rebuilding aprons for Brownsville streets

Included in your service

  • Apron rebuild tied into Brownsville's street grade
  • Widening sized for Cameron County driveway and lot codes
  • Base reinforced against delta clay movement at the street
  • Pitch reset to clear ponding after Gulf storm rain
Learn more→

Sports Court & Path Paving

Courts and paths built for Brownsville's heat and flat ground

Included in your service

  • Reinforced base built for Cameron County heat and clay
  • Leveled surface for consistent bounce on Brownsville courts
  • Drainage pitch to clear Gulf storm rain off the court
  • Line striping suited to local HOA and school specs
Learn more→
Verified client reviews

40+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 40 verified Google reviews

Free Quote

Get Your Free Quote

Asphalt Paving in Brownsville · Response within 24h · No commitment · ☎ (956) 338-5955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm